TEKTRONIX PHASER 740 DRIVERS FOR WINDOWS 7

Command Engine This menu item lets you run individual engine commands to test printer subsystems. Changes to Tektronix instruments are made to accommodate improved components as they become available. While more than Mbytes of RAM can be physically installed on the image processor board, it can electrically support no more than Mbytes. Unhook the tension springs at each end of the shaft from the engine frame. Is the paper in good condition and appropriate for a laser printer? Page Phaser and Color Printers

Uploader: Faum
Date Added: 18 June 2010
File Size: 28.37 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 44350
Price: Free* [*Free Regsitration Required]

To ensure a complete understanding of the product, we recommend participation in Phaser and printer service training. Cork Separator Pad Note the spring is under tension.

For the Tektronix phaser 740 printer, print the built-in Diagnostic Test Page; Does the gear train of the paper eject rollers rotate properly?

Tektronix Phaser – Wikipedia

If you are replacing the image processor board, transfer from the old board to the new board. Replace the imaging unit. High-voltage tektronix phaser 740 Warning The edges on the inside of the card cage tektronix phaser 740 ragged and sharp and can cut you.

Stains on the back of the print Ghosting Unfused or gektronix fused printing Image is skewed on the paper No printing on edge of print Image is not centered on the print when it should be pbaser Phaser and Color Printers Light, Faded, Pale Prints Tektronix phaser 740, faded, pale prints The imaging unit is old or has been exposed to too much room light.

Other Problems No fuser installed message when it is Ensure that the fuser is correctly installed.

Xerox Tektronix 016168600 Genuine Magenta Toner for Phaser 740/740l

Replace the charger or imaging unit if it is broken. 74 printing Fast Monochrome is at 16 ppm on paper. By pressing ‘print’ button you will print tektronix phaser 740 current page.

Page 66 – Specifications Page 67 – service guide Page tektronix phaser 740 – Blank print Page 69 – Single color mottled or with non-uniform Request a Diagnostic Test Page. Paper jams at the second bias transfer roller Clean the intermediate rollers.

Supplies for Tektronix Phaser 740

Phaser Service Tests Do you want 1 sheets or continuous feed single, continuos? You tektronix phaser 740 to receive updates, alerts and promotions phaxer CBS and that CBS may share information about you with our marketing partners so that they may contact you by email or otherwise about tektronix phaser 740 products or services.

This optical sensor marks the home position of the photoconductive belt. Contents of this publication may not be reproduced in any form without permission of Tektronix, Inc. Page 38 Processing and Business Equipment.

Open the left Pgaser an side tektronix phaser 740 Use the Exit button to stop a test as well tektronix phaser 740 return to the main menu.

Phaser printer To reset the image processor to its factory default values, follow this procedure: Main motor Paper feed motor Toner cartridge drive motor Cleaning board Cleaning board Toner cartridge drive tektrpnix Paper feed motor Main motor Removing the main motor, paper-feed motor, toner cartridge drive motor and cleaning board Service Guide Color toner costs run as low as 3 to 5 cents per page.

tekronix Troubleshooting, System Power-up Sequence Troubleshooting This topic discusses tektronix phaser 740 the printer. Page 74 – Dark, irregular, vertical streaks and sm The LED is off while no data is being sent. To avoid personal injury, do not perform any servicing other than that contained in operating instructions unless you are qualified Remember, that doesn’t factor in ancillary consumable costs, such as the fuser roll, which needs to be changed approximately once every 15, pages.

If the Tektronix phaser 740 32 is intermittent: Phaser printer only: Remove the bottom chassis pan.

Note Phaser printer: Print engine sensor, switch and solenoid locations The photoconductive belt position sensor is not illustrated.